Yes, a shearing machine can cut stainless steel—but the answer is conditional. The machine must be rated for the actual stainless grade and thickness, the blades and clearance must be set correctly, the sheet must remain supported and restrained, and a representative test cut must meet both quality and machine-behavior requirements. The fact that a […]

Safe shearing depends on controlling the complete cutting system, not simply keeping hands away from the blade. An operator may stand behind a guard and still be exposed to a descending hold-down, a shifting sheet, a falling offcut, or stored energy in the machine. The danger zone includes the blade opening, the moving mechanisms that […]

A hydraulic shear is not simply a pump that pushes a blade through metal. It is a coordinated system in which the frame, bed, hydraulic circuit, cylinders, blades, clearance adjustment, hold-downs, back gauge, controls, and safety devices must preserve the right relationships throughout every cycle. That is why a machine can have ample hydraulic power […]

When a buyer sees “200 tons” on a press brake specification, the obvious question is: “How thick can it bend?” The nameplate cannot answer that by itself. A short bend in high-strength plate may load the machine differently from a long bend in softer material, even when both blanks have the same thickness. The missing […]