First, remove the protective film from the optical fiber, being careful not to bump it during removal, and gently pull it out. Now begin installing the optical fiber. This is a Raytools 3kW cutting head—this red dot must be aligned to the center; otherwise, the optical fiber will not be able to be inserted. First, […]

The water chiller is currently showing an Er06 alarm. You can scan the QR code with your phone. Er06 indicates a high-temperature water flow alarm. At this point, you need to check whether the high-temperature water circuit is blocked or connected incorrectly. If you are operating a Single Table Fiber Laser Cutting Machine, proper water […]

Power on the water chiller, the water chiller is now switched on. The E15 alarm appears on the display screen, the E15 alarm indicates that the water level in the tank is too low. If this occurs during the startup of your equipment such as a Single Table Fiber Laser Cutting Machine, it’s crucial to […]

A Mentalidade do "Vs.": Por Que Secretamente Torcemos Contra a Máquina O motor ronrona de forma constante, um tom profundo e ressonante que prenuncia o que está por vir. Centralizado sobre a bigorna de aço, repousa um rolamento de esferas impecável e reluzente, aguardando seu destino. À medida que o martelo começa a descer, a cena parece menos uma demonstração de laboratório e mais como um […]