Estun E21s, E200PS and Delem DAC310s controller can be used.
It can reduce the contact between the sheet and the worktable and reduce the work intensity.
The lower end of the press cylinder is made of non-metal material, which has certain elasticity and large friction coefficient. When cutting the sheet, the press pad can be in close contact with the material plate to provide sufficient friction to effectively prevent the plate from being shaken during the shearing process.
The guillotine shear design consists of a box-type bed frame that is fully welded to the workbench. The frame produces high stiffness to balance the torque load generated by the shear forces.
We're using the Siemens motor to ensure the service life of the machine.
The BOSCH (Rexroth) integrated hydraulic system is compact. The system pressure control adopts electro-hydraulic proportional pressure valve, and the whole process pressure can be programmed and controlled to ensure stable and reliable machine performance.
Taiwan PMI ball screw is adopted to ensure the movement of the backgauge in high precision.
The operator can quickly set the desired blade clearance via the electronic knob on the controller.
Blade material 6CrW2Si. Only the highest quality cutting blades are used to ensure the longest service life and the least number of sharpenings.
The laser light alignment device will help you positioning the cutting line quickly. This is convenient and time-saving.
Automatic lift mechanism for large material avoidance. When the back gauge returns to the maximum stroke, its mechanical system immediately raises the stop, allowing the shearer to smoothly pass the underside of the back gauge when cutting the longer sheet.