Write us today

Write us today and our experts are ready to help. You can contact us by the contact form below or write us email or make a phone call!

Q11K Series Hydraulic Guillotine Shear

General Features

  • ADH Guillotine Shearing machine adopt ball screw,linear guide and servo motor to drive the back gauge with high positioning accuracy
  • Integrated steel welded structure,eliminate stress by vibration,with good rigidity
  • Adopt the advanced hydraulic integrated valve block which is in compact structure and will reduce piping connections, and improves system reliability and maintainability
  • Optional Estun E200PS, DELEM DAC310T and DELEM DAC360T, Cybelec CT8 CNC controller
  • Serials connection of oil cylinder to prevent the cutting angle changing during the operation of the shearing machine
  • Accumulator return smooth and rapid
  • Manual/automatic adjustment of blade clearance (depend on the controller), accurate, rapid and convenient
  • Adjustable shear angle to reduce sheet distortion
  • Motorized back gauge and position display make it convenient and precise
  • Rolling material support ball will reduce the scratch and frictions as well


  • Hydraulic Valve: Rexroth
  • Oil Pump: Sunny
  • Oil Cylinder: Sunny
  • Main Motor: Siemens
  • Ball Screw Rod: Zeen/PMI
  • Linear Guide: Zeen/Schneeberger
  • Front Support: Normal Support
  • Line Alignment Device: Light
  • Front Fence: Welded Type
  • Pedal Switch: Simple Emergency Stop Type
  • Controller: E21S
  • Electrics: Schneider


  • Main Motor: WNM
  • Ball Screw Rod: HIWIN
  • Linear Guide: HIWIN
  • Front Support: Angle Adjustable Support
  • Line Alignment Device: Laser Marking Device/Line Alignment
  • Front Fence: Sheet Metal Type/Light Curtain Protection/Section Upturned
  • Rear Protection: Light Curtain Protection
  • Hydraulic Oil Cooling Device: Air Cooling Device
  • Pedal Switch: Roller Pedal Switch

Start 720° Panorama View Now

View our machines with a 720° panoramic view, as if you were standing right in front of them!

Estun E21S NC controller

Estun E21s, E200PS and Delem DAC310T controller can be used.

Front Table

It can reduce the contact between the sheet and the worktable and reduce the work intensity.

Hydraulic Hold-down Pads

The lower end of the press cylinder is made of non-metal material, which has certain elasticity and large friction coefficient. When cutting the sheet, the press pad can be in close contact with the material plate to provide sufficient friction to effectively prevent the plate from being shaken during the shearing process.


The guillotine shear design consists of a box-type bed frame that is fully welded to the workbench. The frame produces high stiffness to balance the torque load generated by the shear forces.

Germany SIEMENS Motor

We're using the Siemens motor to ensure the service life of the machine.

REXROTH Hydraulic System

REXROTH Hydraulic System

The BOSCH (Rexroth) integrated hydraulic system is compact. The system pressure control adopts electro-hydraulic proportional pressure valve, and the whole process pressure can be programmed and controlled to ensure stable and reliable machine performance.

Ball Screw

Taiwan PMI ball screw is adopted to ensure the movement of the backgauge in high precision.

Motorized Blade Gap Adjustment

The operator can quickly set the desired blade clearance via the electronic knob on the controller.


Blade material 6CrW2Si. Only the highest quality cutting blades are used to ensure the longest service life and the least number of sharpenings.

Laser Light Alignment

The laser light alignment device will help you positioning the cutting line quickly. This is convenient and time-saving.

Sheet Support

Automatic lift mechanism for large material avoidance. When the back gauge returns to the maximum stroke, its mechanical system immediately raises the stop, allowing the shearer to smoothly pass the underside of the back gauge when cutting the longer sheet.


Ball Integrated Front Tables

Rolling steel balls will be helpful to reduce surface scratches on the sheet.

Angle Positioning

The angle positioning device has a scale rod, which is quickly processed and applied by a manual positioning lock to cut irregular sections.

Pneumatic Sheet Support

The cylinder drive is used to complete the loading and unloading of the plate with the shearing action, which improves the working precision of the workpiece. It can reduce the sagging deformation of the plate during shearing and improve the shearing effect.

Cooling System

Cooling hydraulic oil.

Premium Backgauge

With high quality and precise backgauge which is controlled by servo motor.

Rear Light Curtain

For the protection of the back side.