Write us today

Write us today and our experts are ready to help. You can contact us by the contact form below or write us email or make a phone call!

WC67K Series Press Brake

General Features

  • The entire EU streamlined design, heat treatment frame, high rigidity workbench, optional mechanical compensation device for precise bending.
  • Hydraulic synchronization control and Estun NC programmable logic controller ensure precise repeatability and ease of use.
  • The integrated hydraulic system (Bosch Rexroth, Germany) can quickly and automatically switch to a slow bend.
  • The X-axis and Y-axis are programmed by the NC E21 system to achieve accurate positioning of the inverter.
  • Advanced variable frequency hydraulic control technology, with more stable, and more reliable operation.
  • The optimal parameter ratio and optimal core configuration ensure stable performance and convenient operation.
  • WC67K series press brake equipped with standard single-axis backgauge system (X-axis) and single-axis bending angle system (Y-axis), you can choose to add V-axis compensation function, and select the appropriate mold to easily bend the workpiece with complex shapes.

STANDARD COMPONENTS

  • Estun E21 numerical control
  • Taiwan DELTA inverter
  • Siemens motor
  • German BOSCH-REXROTH hydraulic system
  • SAEMP/Sunny oil pump
  • JS/EMB fittings
  • HIWIN ball screw & rod (backgauge)
  • Timing belt
  • Galvanized cold drawn tube
  • Fine grinding worktable (double side T-slot)
  • Schneider electrics
  • Y, X axis
  • Europen type punch & die holder
  • Foot pedal with emergency stop button
  • Side and back safety gates

OPTIONAL

  • Front light curtain
  • Rear light curtain
  • Front laser protection
  • Dual inverter
  • Fast clamp
  • Backgauge liner guide
  • Movable support arm with linear guide
  • Air cooling system

Would you like the brochure ?

Check out the technical data sheet and machine details in our brochure

Mechanical Structure

The main mechanical structure of the press brake consists of the frame, column, ram, worktable, the main cylinder and backgauge. The main components are through finite element analysis and optimized design by 3D software to fully guarantee the structural strength and rigidity of each component.

Controller

Adopt Estun's E21 controller which is able to store 40 programs and each program has 25 steps.

Torque Synchronous Control System

Adopt steel torsion bar synchronization system, the structure is very simple, but the accuracy is very high. At the two ends of the ram, there are two synchronizing devices so that the ram movement is always parallel to the worktable. This structure highlights the effect of balancing motion during operation.

Main Motor

The motor of our press brake is adopt world famous brand "Siemens", which will not only has low noise during working of the machine but also has longer service life.

Oil Pump

China Famous Brand SAEMP/ USA Sunny:

  • Amazing low noise, made of high strength cast iron and unique design for inner noise reduction
  • Low sensitivity to oil pollution and assure of long service life

Hydraulic System

Our press brake machine uses BOSCH-REXROTH integrated hydraulic control system that limits the number of pipe connections, making it more reliable and easy for maintenance.

Electrical System

Our press brake adopts Schneider electrical components. The high quality electric parts can make the machine performing well even the electricity is not stable and customers can easily get the replacement anywhere in the world.

Backgauge

We using the Taiwan HIWIN ball screw and rod to ensure the moving of X-axis with high accuracy. And the backgauge adopt timing belt & wheel mechanism which controlled by step motor. The up and down movement of the backgauge finger can be adjusted manually.

Punch & Die

The WC67K series press brake is equipped with standard top punch and multi-V bottom die for the use in various purposes. More press brake toolings can be selected as per your practical use.

OTHER COMPONENTS

Backgauge Finger

Generally the press brake will equip two fingers.

Fittings

JS and EMB tube fittings can be selected.

Inverter

Taiwan DELTA inverter will be helpful to ensure the accuracy.

X-axis Motor

X-axis movement is controlled by step motor.

Fast Clamp

Fast clamp can be used if you need to change the punch frequently.

Front Support

Simple structure and can move left & right in T-slot.

Pedal Switch

The pedal switch will be used to control the movement of the ram. And there'is emergency stop button on top of it.

Side Safety Guard

For the protection of operators.

Rear Safety Guard

Protect the back side which can't be seen in front.

Manual Crowning

The crowning will compensate for the deflection of the worktable during bending process so as to obtain higher working precision.

Front Light Curtain

The front light curtain will be very helpful for protecting the fingers of the operators.

Laser Protection

Does not affect the efficiency of the press brake, can completely solve the safety problem.
Raju R
Raju RDirector
We at R S Machine tool Services are a team of well qualified engineers having experience for past 30-40 years working towards providing best manufacturing solutions for sheet-metal forming with And offered our services to 400 plus customers across Karnataka and Hosur Road We supply high quality reliable products with excellent customer support and after sales services. In collaboration with ADH machine tools we have 50 plus customers who are using our reliable and robust products with positive feedback and testimonials. We supply machinery such as Press brake, Shearing and Fiber Laser Cutting Machine of ADH machine tools
S.Sankara NarayananDirector
ADH has been ably supported Sanmac Machines in Southern Parts of India since last 3 years. Sanmac Team have sold over 50 machines. ADH machine’s high quality sturdy design, aesthetic look and consistent performance is much to be appreciated. This has brought us repeat, more satisfied and delighted customers to our fold. Sanmac gratefully acknowledges the support & cooperation from ADH at every point of time, be it timely delivery machines or parts or service. Sanmac is proud to associate with ADH team whose strong desire to produce top quality products, thus help enjoy a brand image. ADH’s strong commitment to provide top quality is a great boon not only to ADH’s Channel Partner but also to its customers

Over 100 sets of ADH press brake are sold to customers around the world in every month.

ADH Press Brake Customer
ADH Press Brake Customer
ADH Press Brake Customer
ADH Press Brake Customer
ADH Press Brake Customer

Competitive Pricing

Due to our batch manufacturing, we will have a lower price with best quality machines.

Strict Quality Control

All machines are inspected by our quality control department before shipped out.

Technical Support

When a breakdown occurs, our technicals are on call for both online & onsite correction.

Spare Part Kits

Critical components & worn spare parts are offered to avoid unplanned stops.

TOP