First, remove the protective film from the optical fiber, being careful not to bump it during removal, and gently pull it out. Now begin installing the optical fiber. This is a Raytools 3kW cutting head—this red dot must be aligned to the center; otherwise, the optical fiber will not be able to be inserted. First, […]

The water chiller is currently showing an Er06 alarm. You can scan the QR code with your phone. Er06 indicates a high-temperature water flow alarm. At this point, you need to check whether the high-temperature water circuit is blocked or connected incorrectly. If you are operating a Single Table Fiber Laser Cutting Machine, proper water […]

Power on the water chiller, the water chiller is now switched on. The E15 alarm appears on the display screen, the E15 alarm indicates that the water level in the tank is too low. If this occurs during the startup of your equipment such as a Single Table Fiber Laser Cutting Machine, it’s crucial to […]

"对抗"心态：为什么我们暗地里希望机器失败 电机稳稳地嗡嗡作响，深沉而共鸣的音调预示着即将发生的事情。钢铁砧座中央放着一个完美无瑕、闪闪发光的滚珠轴承，等待着它的命运。随着冲头开始下降，这一幕看起来更像是一场实验室演示之外的情景，而不是……