CNC Press Brake

Electro-hydro CNC Press Brake

A few years ago, ADH team realized that energy conservation, efficiency and environmental protection would be the trend, so we developed and produced WAD series press brakes. In the traditional press brake, the pump and motor will run continuously, but in the servo system of our WAD series press brake, as long as the plunger is at rest, the pump and main motor will be at rest. This saves a lot of energy without affecting productivity.
REQUEST A QUOTE
Electro-hydro CNC Press Brake

Video

Watch video below to learn more details.

CNC Controller

There is no doubt that it is the brain of the whole machine. We offer Delem, ESA and Cybelec brand controller, which are imported from the Netherlands, Italy and Switzerland respectively.
The efficient algorithm optimizes the running cycle of bending, reduces the time required to set the work step, and makes bending more efficient, especially for batch processing.
In addition, the system can meet 2D and 3D graphics editing.
Request A Quote
CNC Controller

Hydraulic System

This is an electro-hydraulic servo synchronous hydraulic control system with short hydraulic cylinder spacing. It has strong anti eccentric load ability, high synchronization accuracy, low cost and high power density ratio.
The pressure of the hydraulic system can be adjusted according to the practical use to meet the requirements of bending force.
ADH adopts the well-known German brand Hawei hydraulic system, which has the characteristics of low failure rate and high efficiency.
Request A Quote
Hydraulic Valve

Motor

As we all know, servo motor has become the mainstream, with low energy consumption, high dynamics and improving machine production efficiency as the main goal. Compared with traditional motors, the energy consumption can be saved up to 35%, so it can bring customers the advantages of high efficiency and low operation cost.
At the same time, we also have an efficient and energy-saving motor from Siemens, Germany, which can meet the daily production needs of customers, and its work efficiency is much higher than that of ordinary motors.
Request A Quote
Motor

Oil Pump

The oil pump is made of high-strength cast iron, with unique internal noise reduction design, low sensitivity to oil pollution and long service life.
Request A Quote
Oil Pump

Backgauge

We use imported ball screw and linear guide rail to ensure that the movement accuracy of X-axis is higher than that of screw rod.
The rear stop adopts synchronous pulley mechanism controlled by servo motor instead of stepping motor.
The whole backgauge system is tempered at high temperature, which is conducive to completely eliminate the internal stress, improve the plasticity and toughness of the metal, and make you no longer suffer from any loss of accuracy caused by frame deformation.
Request A Quote
Backgauge

Electrical Parts

It adopts genuine Schneider pieces imported from France, which is stable and durable with long service life;
Equipped with Estun original adaptive electrical box assembly, with strong anti-interference ability and stable electrical operation.
Request A Quote
Electrical Parts

Crowning

Independent design, calculate the compensation value according to the total deformation of the ram and worktable, so as to make the deformation curve of the bed fit perfectly with the compensation curve, and better ensure the consistency of product straightness and angle.
Request A Quote
Press Brake CNC Crowning

Punches & Dies

Press brake punches and dies will be one of the most important topics we discuss before you place the order. Any bending shape will be completed by a suitable set of punch and die. We can provide appropriate toolings according to different bending requirements of customers.
Request A Quote
Punches & Dies

Fast Clamp

Quickly change the top punch to save time
Request A Quote
Punches & Dies

Ball Screw & Guide

Ball screw and linear guide rail are adopted to ensure the smooth operation of the machine.
Request A Quote
Punches & Dies

Servo Motor

The servo motor controls the Y-axis moving with higher accuracy.
Request A Quote
Punches & Dies

Technical Specifications

If you want to know more detailed parameters, please contact us.

WAD/WADE Series With Step/Servo Motor

ModelBending ForceBending Length
(A)
Aprroaching SpeedRam SpeedReturn SpeedColumn Distance
(B)
Throat Depth
(D)
Stroke
(C)
Open Height
(E)
Step/Servo MotorWeightDimensions 
KNmmmm/smm/smm/smmmmmmmmKWTonL*W*H mm
50T/1300500130022015.520011203001504605.5/64.51800*1500*2300
70T/1600700160022015.520013003001504605.5/65.32300*1600*2500
70T/2500700250022015.520020503001504605.5/663100*1600*2500
80T/250080025002201518520503001504607.5/8.76.53100*1600*2600
110T/25001100250022015195205040020048011/10.88.53100*1800*2600
110T/32001100320022015195270040020048011/10.88.53800*1800*2600
110T/40001100400022015195310040020048011/10.89.54600*1800*2600
110T/41001100410022015195360040020048011/10.8104700*1800*2700
135T/32001350320022012150270040020048011/10.8103800*1800*2700
135T/40001350400022012150310040020048011/10.8114600*1800*2700
135T/41001350410022012150360040020048011/10.8114700*1800*2700
170T/32001700320016012122270045020048015/13.211.83800*2000*2800
170T/40001700400016012122310045020048015/13.2134600*2000*2800
170T/41001700410016012122360045020048015/13.2134700*2000*2800
220T/32002200320016011.5135260045020048018.5/16.7133800*2200*2850
220T/40002200400016011.5135310045020048018.5/16.7154600*2200*2850
250T/32002500320010010.5130260045025054022/16.716.53500*2000*2900
250T/40002500400010010.5130310045025054022/16.718.84300*2100*3100
250T/50002500500010010.5130380045025054022/16.7235300*2150*3150
250T/60002500600010010.5130480045025054022/16.7256300*2150*3150
300T/320030003200808.511026005002505702219.53800*2250*3200
300T/400030004000808.5110310050025057022214600*2500*3400
300T/500030005000808.511038005002505702227.55600*2500*3400
300T/600030006000808.5110480050025057022316600*2500*3400
400T/32004000320080880260050030061030233800*2700*3500
400T/40004000400080880310050030061030304600*2700*3500
400T/50004000500080880380050030061030325600*2700*3500
400T/60004000600080880480050030061030386600*2700*3500
500T/400050004000808.590310050030061037374600*2700*3500
500T/500050005000808.590380050030061037425600*2700*3500
500T/600050006000808.590480050030061037486600*2700*3600
600T/400060004000808.585310060032065045484600*3300*3900
600T/500060005000808.585380060032065045525600*3300*3900
600T/600060006000808.585480060032065045586600*3300*3900
600T/700060007000808.585560060032065045687600*3300*3900
700T/600070006000808.585490060032070055786600*3500*4000
800T/60008000600080890460060032080030*2796600*3500*4000
800T/70008000700080890560060032080030*27600*3500*4200
800T/80008000800080890660060032080030*28600*3600*4500
800T/1000080001000080890780060032080030*210600*3600*4900

Upgrade Solutions

If you need to purchase separate accessories or services to renovate the machine, you can learn more through the link below.
Back Gauge Modifcation

CNC Control System

Learn More
Back Gauge Modifcation

Back Gauge Modifcation

Learn More
Back Gauge Modifcation

Safety Arrangements

Learn More
Crowning System

Crowning System

Learn More
Tooling Clamping System

Tooling Clamping System

Learn More
Back Gauge Modifcation

WILA Smart Toolings

Learn More
Back Gauge Modifcation

Bending Angle Measurement

Learn More
Back Gauge Modifcation

Wireless Foot Pedal

Learn More
Back Gauge Modifcation

Stop Fingers

Learn More
Back Gauge Modifcation

Software

Learn More
Back Gauge Modifcation

Bending Follower Supports

Learn More
Back Gauge Modifcation

Industry 4.0 With IOT Productivity

Learn More
Back Gauge Modifcation

Tooling and Tool Storage Solutions

Learn More
Back Gauge Modifcation

Hybrid Servo ECO Function

Learn More
Contact Us
Don't know which machine to choose? Please contact our sales experts to recommend the most suitable machine for your sheet metal product.
Ask An Expert
Privacy PolicyTerms
Copyright © 2022